Factory-direct-hardware Hansgrohe 18440001 Axor Massaud User Manual

Installation Instructions / WarrantyMassaud18440001

10Cleaning Recommendation for Hansgrohe ProductsModern sanitary faucetry and shower fixtures consist of very different materials to comply with the ne

11and (ii) for 5 years, with respect to AXOR products. THIS WARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT PAY FOR:A. Conditions, malfunctions or d

Hansgrohe, Inc. • 1490 Bluegrass Lakes Parkway • Alpharetta, GA 30004Tel. 770 360-9880 • Fax 770 360 9887www.hansgrohe-USA.comUS - Installation Instr

2Axor Massaud Trim, 4-Hole Roman Tub Set18440001Product SpecificationMax. incoming water pressure 145 psiRecommended water pressure 14.5 - 72 psiMax

3InstallationTurn the water off at the main (1).Remove the plaster shields from the hot and cold valves and the diverter housing (2).Install the escut

4Push the spout firmly over the diverter (1). Install the diverter pull rod (2).Tighten the spout set screw with the enclosed 3 mm Allen wrench (1).P

5Pull the Secuflex hose completely out of the holder, to expose the high pressure hose. Separate the Secuflex hose from the high pressure hose by uns

6Unscrew the nut from the handshower holder. Remove the insert. Compress the Secuflex hose so that the end of the handshower hose can be grasped. P

7Cut the o-rings on the end of the Secuflex hose.Push the handshower holder down into the Secuflex holder. The pin on the Secuflex holder should enga

8Scale RemovalThe handshower incorporates the RubitTM self cleaning system. If scale deposits are noticed in the spray chan-nels, turn the water on li

9Replacement Parts1 diverter knob 987070002 spray former 974480003 spout 987060004 handle escutcheon 987080005 diverter 967750006 handle 1