740100-00(5)© 2006 Ingersoll-Rand Company Limited121 West Railroad AvenuePrinceton, IL 61356-01001-800-526-2400FAX: 800-248-1460www.lcn.ingersollrand.
Page 10 of 14 740100-00(5)Safety side Door Mounted Safety Sensor (DMSS) disable feature4. KEYPAD SETTINGS (continued)FrameWallActive Sensor(85 degrees
740100-00(5) Page 11 of 144. KEYPAD SETTINGS (continued)Table 4-1. Control Box Settings and Selectable ValuesOpening SpeedSettingSettingDisplaySelecta
Page 12 of 14 740100-00(5)5. SYSTEM TEST5.1. With the door closed, set the 3-position switch, if used, to AUTO and turn on all AC power.For applicatio
740100-00(5) Page 13 of 14Identify all switch and sensor inputs that are currently active:6.1.1. Remove breakaway jumper to enter diagnostic mode.Note
Page 14 of 14 740100-00(5)7.1. Remove all tools, installation equipment, and debris from the vicinity of the door.7.2. Install all safety, traffic con
Page 2 of 14 740100-00(5)IMPORTANT!These instructions are presented in step-by-step sequence. It is very important thatinstallation begins with “1. Pr
740100-00(5) Page 3 of 14ELECTRICAL SPECIFICATIONSAC input voltage ...120 VACAC fuse ...
Page 4 of 14 740100-00(5)2. INSTALLATIONTo install the Middle or Senior Swing Control Box, follow the Astro/Middle/Senior Swing installation instructi
740100-00(5) Page 5 of 14Figure 3-2. Control box power board connectors.3. WIRING (continued)Figure 3-3. Control box logic board connectors.Figure 3-4
Page 6 of 14 740100-00(5)3. WIRING (continued)Figure 3-5Black, 24 VACRed, 24 VACWhite, ActivateGreen, GroundBlack, 24 VACRed, 24 VACWhite, SlowdownGre
740100-00(5) Page 7 of 14The keypad EL (electric lock) setting is SA (fail safe). When the operator is on, the strike is locked whenthe door is closed
Page 8 of 14 740100-00(5)Figure 4-1. Control Box Panel with Keypad4. KEYPAD SETTINGSSettings (except for close speed) for the Middle and Senior Swing
740100-00(5) Page 9 of 144. KEYPAD SETTINGS (continued)WARNING!KEEP HANDS, CLOTHING, WIRES, TOOLS, LADDERS, ETC. AWAYFROM THE DOOR WHEN THE OPERATOR I
Comments to this Manuals